How Can We Help?

Print

Forever Multi Trans Select Instructions

For Paper and Wood

Printer Settings:

  • Paper Settings: Heavy Paper or similar
  • Printer Settings: Multi-Purpose Tray
  • Image Mode: Mirrored
  • Image Preparation:
    B&W Printers:100% Black
    CMYK Printers: 400% Black(C : 100% + M: 100% + Y: 100% + K: 100% = 400% Black)
    WHITE TONER Printers: 300% Black(C : 100% + M: 100% + Y: 100% = 300% Black)

Transfer Settings:

Wood

2-3 bar/medium

130°C/265°F

90 Seconds

Cold

Paper/Card 

2-3 bar/medium

150°C/300°F

10 Seconds

Cold

Substrate

Pressure

Temperature

Time 

Peel


Transfer Application: Paper/Card

  • Place your transfer paper onto the substrate on which you want to press.
  • When the substrate has completely cooled down, carefully remove the transfer paper.
  • Cover everything with a sheet of Matt Finish Economy. (If the surface is uneven, use a thin silicone pad with 1mm thickness)
  • Close the press using the settings above.
  • After the pressing process, place your substrate to one side and allow it to cool down.

Transfer Application: Wood/Rough Surfaces

  • When the substrate has completely cooled down, carefully remove the transfer paper.
  • Cover with a 1mm silicone pad. This prevents the edges of the transfer paper from transferring to the substrate.
  • Cover everything with a sheet of Matt Finish Economy.
  • Place your transfer paper onto the substrate on which you want to press.
  • Close the press using the settings above.
  • After the pressing process, place your substrate to one side and allow it to cool down.