DTF Xpress Film Placement
Note: In order to use the newly released DTF print modes you must update your printer driver in Cadlink DFAPE v10 software. DTF is compatible with TexJet echo2, TexJet shortee2 and older models running Cadlink Digital Factory Apparel v10 Polyprint Edition.
How to update your drivers: How to get the latest updates in Digital Factory Apparel Polyprint Edition v10
Place the DTF Xpress antislip pad on the platen. Place on top, the DTF Xpress transfer film on the platen with the matte side facing upwards.
Note: The DTF Xpress antislip pad keeps the film flat and steady. If your platen, though, is not cleaned properly, then the antislip pad may move during printing. For that reason, you can use paper tape to secure the pad in place.
Perform the Auto Height Adjustmentprocess, in order your design to be printed with precision and sharp details.