For Paper and Wood

Printer Settings:

• Paper Settings: Heavy Paper or similar
• Printer Settings: Multi-Purpose Tray
• Image Mode: Mirrored
• Image Preparation:
  B&W Printers:100% Black
  CMYK Printers: 400% Black(C : 100% + M: 100% + Y: 100% + K: 100% = 400% Black)
  WHITE TONER Printers: 300% Black(C : 100% + M: 100% + Y: 100% = 300% Black)

Transfer Settings:

Transfer Application: Paper/Card

• Place your transfer paper onto the substrate on which you want to press.
• When the substrate has completely cooled down, carefully remove the transfer paper.
• Cover everything with a sheet of Matt Finish Economy. (If the surface is uneven, use a thin silicone pad with 1mm thickness)
• Close the press using the settings above.
• After the pressing process, place your substrate to one side and allow it to cool down.

Transfer Application: Wood/Rough Surfaces

• When the substrate has completely cooled down, carefully remove the transfer paper.
• Cover with a 1mm silicone pad. This prevents the edges of the transfer paper from transferring to the substrate.
• Cover everything with a sheet of Matt Finish Economy.
• Place your transfer paper onto the substrate on which you want to press.
• Close the press using the settings above.
• After the pressing process, place your substrate to one side and allow it to cool down.